P1PE P215DKH Diesel/Kerosene Space Heater 215,000BTU/hr (63kW) Heater by P1 Power Equipment
- 215,000 BTU/hr (63kW) output
- 1500m3 approximate heating area
- Suitable for approx 8.5hrs of operation
- Easy-to-read fuel, pressure and temperature gauges
- Runs on diesel (red or white) or kerosene fuel
- Perfect choice for industrial environments, including agriculture and automotive
- UK-based after sales and parts
- 2 year limited warranty*
Developed under our sister brand, Position 1 Power Equipment, our 215,000BTU/hr P215DKH industrial space heater from P1 (Position One Power Equipment), is an ideal choice for heating your larger-sized garage, factory or workshop.
This forced air heater, which runs on either diesel or kerosene, can be classed as one of the most cost-effective ways to heat large areas.
With an impressive output of 63kw/215,000BTU, this air heater has an approximate heating area of 1500m3, distributing the heat quickly and evenly and keeping you warm regardless of the weather outside.
Simply fill/top up the easy-to-access fuel tank, plug the heater into a standard UK socket, (13 Amp UK plug already fitted), turn the thermostat to the required temperature and switch to the ‘on’ position.
The temperature of this compact space heater is easily adjustable using the thermostat knob located on the side of the heater. The heater will shut down when the desired temperature is reached and restart when the temperature drops.
With impressive average fuel consumption of only 5.8L/hour, this efficient space heater will keep you warm whatever the weather, with a tank capacity suitable for approximately 8.5 hours of operation.
Just like any space heater, our P215DKH requires a little room to be left around it for safety, especially due to the quality way it projects heat into a room or area. Ideally, try to leave around 8ft from the outlet, and 4ft around the sides and top. Don’t forget to place it on a suitable surface!
Mounted on two wheels and fitted with a stand, this diesel space heater can be easily moved from area to area with ease.
Ideal for placement in the open and semi-open, this heater is the best choice for industrial environments, including agriculture and automotive.
Minimal assembly required; just assemble the wheeled stand and fill with diesel, plug in and set the thermostat to the desired temperature.
Be prepared for cold snaps and invest in a P1 Power Equipment Diesel Space Heater today.
Offering great value for money, these powerful diesel air heaters, in an eye catching colour, are built to last and come with a 2 year warranty*.
What is ‘BTU’?
BTU, or, British Thermal Unit is a measure of energy – an alternative measurement to joules. The very basic way to think of a BTU is that 1 BTU is the equivalent of burning a normal sized wooden match all the way from one end to the other.
The exact measurement of a British Thermal Unit is the amount of heat that it takes to heat one pound (approx one pint) of water by one degree and is measured at the amount of energy to make the 1lb of water heat from 39 Degrees Fahrenheit up to 40. (It can take slightly more or less energy to heat water by one degree Fahrenheit depending upon the starting temperature).
Please note, these are P1 developed units and not Powered by Hyundai
Net Weight (kg) 29.8kg
Heat Output 63kW or 215,000BTU/hr
Fuel Consumption 5.8L/hr
Fuel Type Diesel or Kerosene
Max Outlet Air Temperature 516°C
Approximate Heating Area 1500m3
Warranty 2 Year
Dimensions (H x W x L) (mm) 500x460x1060
In The Box P1 P215DKH Space Heater, User Manual, Wheel Support Frame, Wheels, Rear Handle, Axle, Screws and Nuts, Cotter Pins and Washers